HP ZUP Compression Pressure Tester HP912 300 00
Index:
HP912 300 00
Rate this product first
2
pcs.
923.02 £
Specification
Set:
Yes
Name:
Compression pressure tester
Intended use (parts, components):
for engine
Application (Activity):
for compression measurement
Petrol type:
Diesel
Bar code:
IC-BBE67E, 5904378781903
Item code:
BBE67E
Item index:
HP912 300 00
PCN:
90328900
Manufacturer:
Compression Pressure Tester DIESEL with Adapter Set SPCS - 50 SK MASTER
In the tester, threaded connections have been replaced with quick couplings, which significantly facilitates and speeds up the measurement process.
The built-in electrical connector in the tester handle allows for one-person operation of the device.
The measurement is carried out by replacing the nozzle, injector, or glow plug with the appropriate measuring tip (adapter).
10 - 50 bar (1.0 - 5.0 MPa)
Compression measurement device with a handle equipped with a starter switch and a vent valve (drain) 912 201 00
Pressure hose with check valve, length 360 mm 912 202 00
Electrical cables for starting the engine 912 404 00
Angled connector M12 x 1.5 SK 912 203 00
Angled connector M14 x 1.5 SK 912 204 00
Quick-release reduction M12 x 1.5 SK 912 205 00
Quick-release reduction M14 x 1.5 SK 912 206 00
Recording diagrams 100 pieces 609 195 00
Adapter (measuring tips) replacing the nozzle: A, B, D, E, F 912 011 - 016 00
Adapters for compression measurement in place of injectors 4 pcs
Adapters for compression measurement in place of glow plugs 11 pcs
Adapters in place of glow plugs:
2 S 912 450 02
5 S 912 450 05
6 S 912 450 06
8 S 912 450 08
25 S 912 450 25
26 S 912 450 26
30 S 912 450 30
36 S 912 450 36
49 S 912 450 49
52 S 912 450 52
71 S 912 450 71
Adapters in place of injectors:
16 W 912 450 16
42 W 912 450 42
44 W 912 450 44
75 W 912 450 75
Manufacturers of compression testers in adapter descriptions simplify
designations and only provide the nominal diameter of the spark plug thread
(e.g., 10 mm, 12 mm, 14 mm).
This is not the full thread name,
but it always corresponds to a specific metric thread type
Mxx×pitch.
That means:
| Simplified designation | Actual spark plug thread |
|---|---|
| 10 mm | M10×1.0 |
| 12 mm | M12×1.25 |
| 14 mm | M14×1.25 |
| 18 mm | M18×1.5 |
Gasoline (spark plugs)
- M10×1.0
- M12×1.25
- M14×1.25
- M18×1.5
- M8×1.0
- M9×1.0
- M10×1.0
- M10×1.25
- M12×1.25
- M14×1.25
- M20×1.5
- M22×1.5
- M24×2.0
- Special connectors for injectors (various CR, TDI, CDI systems)
Users' opinions *
We are loading opinions for this product...
Add opinion