PROFIRS Paint HS transparent 0RS208-5L

0RS208-5L CLEAR COAT HS STANDARD

 

Characteristics:

Clear coat with high solids content, excellent flow, and increased scratch resistance. It is also characterised by a high degree of hardness, UV resistance (does not yellow), and resistance to chemical and climatic factors. Intended for application in spray booths on water-based and solvent-based base coats using a spray gun.

Method of use:

Measure the A + B mixture by volume: 100 parts by volume of lacquer (A) and 50 parts by volume of hardener (B), then mix thoroughly. Apply with a spray gun with a 1.3 mm nozzle, in two normal coats with a 10-minute interval for solvent evaporation before applying the next coat.

NOTE: Drying the product at ambient temperature extends the standard curing time.

To improve the gloss effect, it is recommended to use Top Gloss Additive in an amount of up to 5% vol. on component A.

ProfiRS Clear Coat 2:1 HS capacity 5 Litres without hardener (standard hardener 0RS304-2.5L, fast hardener 0RS312-2.5L)