PROFIRS Putty super-light with fiberglass galvanized metal, steel
Specification
GLASS LIGHT FILLER: 0RS006-1L
Super light filler with fibreglass. It features a creamy consistency that allows easy modelling in layers of 2 - 4 mm and sanding with high grit abrasive materials. The possibility of using higher grit abrasive materials (coarse sanding P120 - P150) and the adjusted hardness of the filler to paint coatings eliminates the formation of transitions between the filler and the repaired surface. Thanks to this, the filler can also be used directly under the filling primer. The filler is particularly intended for repairing large, very damaged surfaces.
For filling irregularities on steel, aluminium, galvanised and polyester-glass surfaces. Intended for manual and machine processing with dry abrasive materials, it does not clog sandpaper during sanding. It can be easily modelled even on surfaces with complex shapes, even when applying thicker layers. It has very good adhesion to the substrate, and is used, among other things, to reinforce the surface weakened after bodywork repair, increasing the mechanical strength of the repaired element.
Method of use:
The repaired substrate must be clean, dry, degreased and matted. Thoroughly mix the filler mass with the hardener in an amount of 2-3% by weight, then apply to the substrate for approx. 5 min. at 20 oC - higher temperature shortens the product's life and accelerates the curing process.
WARNING: Overdosing the hardener may cause discolouration of the topcoat. It is not recommended to use the product at temperatures below 15 oC.
Labeling according to Regulation (EC) No 1272/2008 The product is classified and labeled according to CLP regulations. Hazard pictograms ! GHS02 GHS07 GHS09 Signal word Warning Hazard-determining components: dibenzoyl peroxide Hazard statements H242 Heating may cause a fire. H319 Causes serious eye irritation. H317 May cause an allergic skin reaction. H410 Very toxic to aquatic life with long lasting effects. Precautionary statements P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children. P280 Wear protective gloves/protective clothing/eye protection/face protection. P302+P352 IF ON SKIN: Wash with plenty of water and soap. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P403+P235 Store in a well-ventilated place. Keep cool. P501 Dispose of contents/container in accordance with local/regional/national/international regulations. In all cases, follow the information on the product label