ATE Devices for working fluids and fuels 03.9302-1502.4
Index:
03.9302-1502.4
Rate this product first
8
pcs.
You save: 623.27 £
582.67 £
1 205.94
£
Lowest price in 30 days from the promotion is: 1 205.94 £
Specification
Category:
Devices for working fluids and fuels
Name:
Devices for working fluids and fuels
Model:
FB 5EV
Application (Activity):
for bleeding the system
Application (Activity):
for replacement
Intended use (parts, components):
for brake system
Intended use (material):
brake fluid
Capacity [l]:
5
Serviced vehicle:
passenger cars
Serviced vehicle:
commercial vehicles
Bar code:
IC-F60239, 4006633456678
Item code:
F60239
Item index:
03.9302-1502.4
PCN:
84132000
Manufacturer:
Specification Tecdoc
Voltage [V]:
230
FB 5ev - 5 l brake bleeding device
The ATE FB 5ev is an extremely compact and robust 5-liter brake bleeding device.
Meets all requirements for filling, flushing and bleeding modern brake systems.
The brake fluid pressure setting is available from 0.4 to 3.5 bar, thus meeting all pressure ranges required by leading car manufacturers.
The working pressure is regulated using a regulator and can be monitored using a pressure gauge.
Today's low-viscosity brake fluids place high demands on the safe operation of the brake filling and bleeding system, which was particularly important when developing the new ATE FB 5ev.
A special pump creates a pulsating flow of fluid that helps clean and bleed the brake system.
ATE FB 5ev works directly from the ATE 5 liter fluid pack, which is safe
attached to the device.
The suction lance is mounted in the container with a special rubber sealing cone.
Constant pressure monitoring allows the pump to be turned off in the event of a lack of fluid, which prevents air from being fed into the braking system.
A large carrying handle ensures the mobility of the device.
The ATE FB 5ev is supplied with a vent adapter no. 20.
Technical data:
Brake fluid capacity 5 liters
Power supply 230 V ~, 50 - 60 Hz
Pump flow approx. 24 l/h at 2 bar pressure
Working pressure 0.4-3.5 bar
Turning off the pump to approximately 9 mm of the remaining fluid level in the bulb
Length of the power cord 5 m
Hose length 3.5 m
Dimensions 530x285x250mm
Libra 8.6kg
Noise level 66dB(A)
The ATE FB 5ev is an extremely compact and robust 5-liter brake bleeding device.
Meets all requirements for filling, flushing and bleeding modern brake systems.
The brake fluid pressure setting is available from 0.4 to 3.5 bar, thus meeting all pressure ranges required by leading car manufacturers.
The working pressure is regulated using a regulator and can be monitored using a pressure gauge.
Today's low-viscosity brake fluids place high demands on the safe operation of the brake filling and bleeding system, which was particularly important when developing the new ATE FB 5ev.
A special pump creates a pulsating flow of fluid that helps clean and bleed the brake system.
ATE FB 5ev works directly from the ATE 5 liter fluid pack, which is safe
attached to the device.
The suction lance is mounted in the container with a special rubber sealing cone.
Constant pressure monitoring allows the pump to be turned off in the event of a lack of fluid, which prevents air from being fed into the braking system.
A large carrying handle ensures the mobility of the device.
The ATE FB 5ev is supplied with a vent adapter no. 20.
Technical data:
Brake fluid capacity 5 liters
Power supply 230 V ~, 50 - 60 Hz
Pump flow approx. 24 l/h at 2 bar pressure
Working pressure 0.4-3.5 bar
Turning off the pump to approximately 9 mm of the remaining fluid level in the bulb
Length of the power cord 5 m
Hose length 3.5 m
Dimensions 530x285x250mm
Libra 8.6kg
Noise level 66dB(A)
FB 5ev - 5 l brake bleeding device
ATE FB 5ev is a 5-litre brake bleeding device characterised by its compact size and high durability. It meets all the requirements for filling, flushing, and bleeding modern electronic brake systems.
- Variable pressure setting ranging from 0.4 to 3.5 bar, meeting the pressure range requirements of leading car manufacturers.
- Pressure adjustment is done using a rotary regulator, and its control is possible thanks to a class 1.6 manometer.
- A special pump generates a pulsating fluid flow, aiding in the complete flushing and bleeding of the brake system.
- The device works directly with a 5-litre ATE brake fluid container, eliminating the need for time-consuming fluid transfer.
Safety and convenience:
- The suction lance is securely mounted in the container using a rubber sealing cone.
- The pump automatically shuts off when the container is empty, ensuring that air does not enter the brake system.
- Practical handles placed on the side of the device for the filling hose and power cord, as well as mounts for three bleeding caps on the back panel.
- The power cord connected with a plug (IEC 60320) allows for quick replacement in case of damage.
Ergonomics:
The device's large handle allows for easy carrying. Additionally, the device's design ensures ease of use and workspace organisation.
Advantages
- Variable pressure setting 0.4-3.5 bar
- Compact design
- High durability
- Easy operation
- Suitable for low-viscosity brake fluids
- Pulsating brake fluid flow
| Parameter | Specification |
|---|---|
| Brake fluid capacity | 5 litres |
| Power supply | 230 V ~ , 50 - 60 Hz |
| Pump performance | approx. 24 l/h at 2 bar pressure |
| Operating pressure | 0.4-3.5 bar |
| Automatic pump shut-off | At approx. 9 mm remaining fluid level in the container |
| Power cord length | 5 m IEC |
| Connection hose length | 3.5 m |
| Dimensions (h x w x d) | 530 x 285 x 250 mm |
| Weight | 8.6 kg |
| Noise level | 66 dB(A) |
Scope of delivery
| Item |
|---|
| Complete device |
| Operating instructions |
| Bleeding cap no: 20 (European cap) |
You may also need
You may also need: Please wait...
Users' opinions *
We are loading opinions for this product...
Add opinion