PROFITOOL Cleaner for DPF/FAP filter 5l 1305-01-0055E

LEAFLET DPF cleaner
APPLICATION:
Professional, concentrated, non-foaming preparation designed to clean DPF/FAP.
The multi-ingredient formulation enables honeycomb action to remove carbon, soot and ash residues.
It dissolves residual substances and restores the filter to full efficiency.
It leaves no residue after use.
INTENDED USE:
DPF cleaning:
-immersion method
-cleaning gun
-closed loop industrial washers
DIRECTIONS FOR USE:
Remove the DPF.
Dip the filter into the solution (5%-20% depending on the degree of soiling) in a large enough container.
Leave for 2 to 8 hours (depending on the degree of soiling).
Rinse the filter with clean water and let it dry.
For best results after the immersion method it is recommended to continue washing the filter in a closed circuit industrial machine.
Fill the filter with concentrate (about 200ml)
Place the filter in the washing machine.
Use a bath solution of 2%-5%.
Start the closed circuit wash cycle.
In case of heavy soiling repeat the action.
Let the filter dry after washing.
Composition: non-ionic surfactants (c< 5 %), aliphatic hydrocarbons (5 NOTE
H319 Causes serious eye irritation.
H315 Causes skin irritation
P101 If medical advice is necessary present the container or the label to the physician.
P102 Keep out of the reach of children.
P280 Wear protective gloves/protective clothing/eye protection.
P305+P351+P338 IF IN EYES:
Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do.
Continue rinsing.
P302+P352 IF ON SKIN:
Wash with plenty of soap and water.
P501 Dispose of contents / container to properly labelled containers for selective collection of waste emptied by an authorised company
DPF LEAFLET APPLICATION: A professional, concentrated, non-foaming preparation designed for cleaning DPF/FAP particulate filters. The multi-component formula allows action within the honeycomb structure, removing carbon, soot, and ash residues. It dissolves accumulated substances and restores the full efficiency of the filter. Leaves no residues after use. PURPOSE: Cleaning the DPF particulate filter: - immersion method - cleaning gun - industrial washers with a closed circuit USAGE: Dismantle the DPF filter. Immerse the filter in a solution (5%-20% depending on the degree of contamination) in a suitably large container. Leave for a period of 2 to 8 hours (depending on the degree of contamination). Rinse the filter with clean water and leave to dry. For best results after using the immersion method, further washing of the filter in an industrial machine in a closed circuit is recommended. Pour concentrate into the filter (about 200ml). Place the filter in the washing machine. Use a bath solution of 2%-5%. Start the washing cycle in a closed circuit. In case of heavy contamination, repeat the process. After washing, leave the filter to dry. Composition: non-ionic surfactants (c< 5%), aliphatic hydrocarbons (5