IDEAL Battery tester conductance 12V BDT7000

CHARACTERISTICS:

The BDT7000 12/24V battery and installation tester with a colour LCD display and printer is designed for WET / VRLA / GEL / EFB / AGM Spiral / AGM flat batteries.

Technical parameters:

• Allows verification of:

• the state of charge and starting ability of 12V batteries used in vehicles (BATTERY TEST)
• the operation of the vehicle's starting system 12/24V (START TEST)
• the operation of the charging circuit in the vehicle 12/24V (ALTERNATOR TEST)
• Using the tester, we can select the battery standard: EN, JIS, DIN, IEC, SAE

• ​The lowest and highest starting current values (CCA) that can be tested:

• EN: 100 - 1800 A
• IEC: 100 -1200 A
• DIN: 100 - 1200 A
• SAE: 100 - 2000 A
• JIS: 100 - 2000 A
• The ambient temperature for proper use of the tester is between -10°C and 50°C.

• As a result of the BATTERY TEST, the actual starting current value is given:

• Battery good
• Good - charge
• Charge and test
• Replace
• Damaged cell - replace
• As a result of the ALTERNATOR TEST, the battery voltage value is given:

• Charging voltage OK
• No charging voltage
• Low charging voltage
• High charging voltage
• As a result of the STARTER TEST, the lowest battery voltage obtained during start-up is given:

• Starting voltage OK
• Low starting voltage
• No start
• In certain cases, the device may inform us about:

• reverse polarity connection of clamps
• no voltage or too low battery voltage
• the need to replace the battery in the tester
• the need to replace the paper in the printer
• The choice of test type is very simple, and the results do not require interpretation by the person working with the tester.

Physical parameters:

• The device supports 3 languages: Polish, English, and Chinese.
• The tester stores the last 5 measurement results and allows them to be printed at any time.
• The tester settings allow the company name to be printed on the results.

Power parameters:

The tester is powered by the voltage from the tested battery and 4x1.5V LR6 AA batteries.

Equipment:

The device is equipped with a case, detachable cables of 180 cm length, and 2 rolls of printer paper.

Warranty conditions:

12-month warranty for professional use. Warranty service is provided in a door-to-door system with no transport costs for the user.