AIRPRESS Inflating gun digital 0-10bar 42064

Professional 10 Bar Inflation Gun With this inflation gun, you can easily inflate car or trailer tires. Thanks to additional nozzles, it is possible to inflate mattresses, balls, or bicycle tires. The gun is equipped with a digital display, allowing you to easily switch units to BAR, KPA, PSI, and KGM. The set includes three nozzles, giving the gun universal application. The inflation gun has a 1/4" air inlet and is equipped with Euro and Orion connectors. The plug nipples are equipped with a special layer on the screw thread, creating an airtight connection between the compressor and the inflation gun. This facilitates a tight connection of the gun with the pneumatic hose and the compressor. How the professional inflation gun works The gun operates with a maximum pressure of up to 10 bar. The operating temperature ranges from -20 °C to 50 °C. For the device to function properly, it requires AAA batteries, which are not supplied as standard. You can fill tires with air, deflate, and measure tire pressure. It is essentially a tire pump and digital pressure gauge in one. After previously connecting the gun to the compressor, you can fill the tire simply by pressing the lever. Is there too much air in the tire? Nothing simpler, deflation is done using the button on the side. On the digital screen, you can see how much air is in the tire. To check the safe inflation value for a tire, refer to the vehicle manual or information plate (usually located near the fuel cap or on one of the vehicle's pillars). Standard values for a passenger vehicle are from 2 to 2.2 bars of air (depending on the car). The digital pressure gauge has a diameter of 60mm and features a rubber cover, providing good protection against accidental damage. Below the screen are two buttons, one for turning on the gun, allowing you to select the scale (PSI, BAR, KPA, and KG/CM²). The second button is for turning on the screen backlight, which is ideal when using the gun in the dark. The inflation gun meets EU safety standards EN 61000-6-1: 2007 and EN 61000-6-3: 2007 + A1: 2011. What can the inflation gun be used for? The professional inflation gun is equipped with a 60cm long hose. At the end, there is a latch allowing the attachment of the appropriate nozzle. With the nozzles, you can easily inflate mattresses, balls, bicycle wheels, etc. The gun can be used in a home garage, but also in car workshops or tire service shops. Thanks to the high accuracy of this professional device, you can safely perform your work.