IDEAL Induction heater 10 kW INDUCTOR DRAGON IHD800
Specification
Specification Tecdoc
DRAGON 800 IHD08
DRAGON 800 is a revolutionary induction heater used for quick flameless heating of ferrous metals and aluminium using the induction method.
Power supply: 3x400V | Power: 10kW
Using the principles of electromagnetic induction, it can deliver a huge amount of heat to a specific location in just a few seconds to a depth of 5mm. It heats metal to 'red hot' (temperature approx. 1000˚C) in an area of 8x13mm and thickness of 5mm in 1 second. By heating only the selected area, it does not damage glass, rubber, plastic parts, or painted surfaces in the immediate vicinity of the heater's operation.
Recommended for every passenger and commercial vehicle service for bodywork and mechanical repairs. For use in repairs and wheel alignment, in tyre replacement points and mechanical workshops. It facilitates the disassembly of blocked screws, nuts, pins, bearings, and other car parts.
Guarantees reduced repair time and maximum heating control during operation. Unlike a gas torch, the induction heater heats metal only in the selected area to a temperature of 500-600˚C without changing the technical characteristics of the steel.
Power regulation in 10% increments
Power supply parameters
Three-phase 3x400V.
The device is equipped with a power plug.
Warranty conditions
Warranty: 12 months for professional use. Warranty service is provided in a door-to-door system without transport costs for the user.
Manufactured in the EU.
Technical parameters
| Current drawn from the network | 12A |
| Power supply network protection | 16A slow-blow |
| Length of the complete cable | 4m |
| Tank capacity | 20 litres |
| Type of cooling | liquid |
| Continuous operation time | over 30 minutes at maximum power |
| Frequency | 15-50 kHz automatically regulated |
| Maximum power | 8kW |
| Heating power (temperature approx. 1000˚C) | 8x13x5mm in 1 second |
| Peak power | 10kW |
| Regulation steps | 10 |
Power supply parameters
| Rated supply voltage | 3x400V; 50Hz/60Hz (3ph) |
Physical parameters
| Protection degree | IP21 |
| Weight | 80kg with coolant |
| Overall dimensions L x W x H | 620x490x1010 mm |