Fitting position
Mounting, control/trailing arm
TEDGUM
Mounting, control/trailing arm 00441016
TEDGUM
Mounting, control/trailing arm TED15441
TEDGUM
Mounting, control/trailing arm TED97566
TEDGUM
Sleeve, control arm mounting 00469965
TEDGUM
Sleeve, control arm mounting 00469971
TEDGUM
Mounting, control/trailing arm 01134338
YAMATO
Mounting, control/trailing arm J50557YMT
YAMATO
Sleeve, control arm mounting J55040DYMT
YAMATO
Mounting, control/trailing arm J50327YMT
LEMA
Mounting, control/trailing arm LE1590.00
FEBI
Mounting, control/trailing arm FE104880
MOOG
Bushing, axle cross member FD-SB-3501
TEDGUM
Mounting, control/trailing arm 00280190
MPBS
Front Swingarm bushing (rear) (1 pcs) Front/In the back 1400749-00/80SHA CITROEN C2, C3 I, C3 PLURIEL; PEUGEOT 1007
MPBS
Front upper Swingarm bushing (2 pcs) Front 0601661-00/80SHA AUDI A4 B5, A4 B6, A4 B7, A4 B8, A4 B9, A5, A6 C5, A6 C6, A6 C7, A6 C8, A7, A8 D2, A8 D3, A8 D4, A8 D5, Q5; PORSCHE MACAN
MPBS
Front Swingarm bushing (2 pcs) Front 0802704-00/CS BMW 5 (E60), 5 (E61), 6 (E63), 6 (E64), 7 (E65, E66, E67)
MPBS
Front Swingarm bushing 14mm (1 pcs) Front/In the front 2003848-00/80SHA/14 FIAT BRAVO II, STILO; LANCIA DELTA III
MPBS
Polyurethane front Swingarm bushing (1 pcs) Front 2004448-00/80SHA CITROEN JUMPER III; FIAT DUCATO; PEUGEOT BOXER
MPBS
Polyurethane bushing Front 2102849-00/80SHA
MPBS
Front lower Swingarm bushing (inner) 12mm (2 pcs) Front 2201213-00/80SHA/12 HONDA CIVIC V, CIVIC VI, CR-V I, CRX III; ROVER 400 II
MPBS
Polyurethane front Swingarm bushing (1 pcs) Front 2201449-00/80SHA ACURA RSX; HONDA CIVIC VII, CR-V II, ELEMENT, INTEGRA
MPBS
Front upper Swingarm bushing (4 pcs) Front 2900608-00/80SHA JEEP CHEROKEE, GRAND CHEROKEE I
MPBS
Front Swingarm bushing (1 pcs) Front/In the front 4601848-00/80SHA OPEL COMBO, COMBO TOUR, CORSA C, MERIVA A, TIGRA; PEUGEOT 406
MPBS
Polyurethane stabilizer bushing (1 pcs) Front 5100829-00/80SHA/23 RENAULT 19 I, 19 I CHAMADE, 19 II, 19 II CHAMADE, CLIO I, CLIO II, KANGOO, KANGOO EXPRESS, MEGANE I, MEGANE I CLASSIC
MPBS
Front Swingarm bushing (rear) (1 pcs) Front 5601349-00/80SHA SKODA OCTAVIA II, SUPERB II, YETI; VW BEETLE, CADDY ALLTRACK IV, CADDY III, CADDY IV, JETTA IV
MPBS
Front swingarm bushing (front) (1 pcs) Front/In the front 6201548-00/80SHA TOYOTA CELICA
MPBS
Polyurethane suspension bushings set (12 pcs) Front 6501302-17/80SHA SEAT CORDOBA, IBIZA II, TOLEDO I; VW CADDY II, GOLF II, GOLF III, JETTA II, PASSAT B3/B4, VENTO
MPBS
Polyurethane suspension bushings set (12 pcs) Front 6501302-19/80SHA SEAT CORDOBA, IBIZA II, TOLEDO I; VW CADDY II, GOLF II, GOLF III, JETTA II, PASSAT B3/B4, VENTO
MPBS
Front 17mm Swingarm bushing (rear) (2 pcs) Front 6501349-00/80SHA/17 SEAT CORDOBA, CORDOBA VARIO, IBIZA II, INCA, TOLEDO I; VW CADDY II, GOLF II, GOLF III, JETTA II, PASSAT B3/B4, VENTO
MPBS
Polyurethane bushing (2 pcs) Front/In the front 6505248-00/CS VW CALIFORNIA T5 CAMPER, CALIFORNIA T6 CAMPER, MULTIVAN T5, MULTIVAN T6, MULTIVAN T7, TRANSPORTER T5, TRANSPORTER T6
Control Arm Bushings – Essential Suspension Components
The car's suspension system comprises several interconnected components working in harmony. Its primary purpose is to ensure proper wheel adhesion to the road surface (both on straights and curves) and provide ride comfort.
One of the key suspension parts is the bushing, a rubber-metal component used to attach the control arm to the chassis. The bushing acts as the pivot point for the control arm and, through its rubber layer, absorbs vibrations. This prevents vibrations from transferring to the car body, reducing noise levels. Hence, this part is often referred to as a silentblock (silent meaning quiet).
Bushings are among the fastest-wearing suspension components. Despite advancements in synthetic materials, they eventually deteriorate due to stress and material ageing. High forces and ageing cause the rubber to crack and tear, leading to play in the suspension. This can result in unstable driving (the car pulling to one side or improper handling on curves), delayed or unresponsive wheel reactions, and unusual suspension noises.
To restore the suspension system, a damaged control arm silentblock must be removed using a special press and replaced with a new one. Some vehicles have bushings designed for easier removal, requiring only part of the control arm to be unbolted, making the replacement process quicker.
Find the Perfect Silentblock for Your Vehicle
Control arm bushings come in various designs, differing in shape, mounting methods, and component configurations.
Typically, a front control arm bushing or rear bushing comprises three elements:
- An inner sleeve,
- A rubber connector,
- An outer sleeve.
Both the front and rear bushings are usually made of steel. The inner sleeve has a hole diameter matching the control arm's mounting bolt, while the outer sleeve fits inside the control arm housing.
In some designs, bushings lack an outer sleeve. This setup is used in suspensions where the control arm itself serves this function. Such silentblocks often feature retaining rings to secure them within the control arm.
A front control arm bushing is a variant of silentblock, often equipped with a metal connector welded to its exterior, allowing it to be bolted to the control arm. This design is common in many European, Japanese, and Korean vehicles.
No matter the technical design used in your car, you can find control arm bushings for your vehicle in the Inter Cars store. Among thousands of options, you will find silentblocks for front and rear suspensions suitable for European, American, Japanese, and Korean cars. Reputable brands include TRW, Moog, Magneti Marelli, Meyle, Febi, Sasic, Reinhoch, Korea Tedgum, and Delphi.
Well-Maintained Control Arm Bushings – Safety and Stability
The suspension system is a critical component of a vehicle that directly impacts driving safety. Wear and tear in this system can make the car unstable. Wheels may fail to follow the road surface properly, and during manoeuvres, they might operate at incorrect angles. Under high forces, this can lead to loss of control or accidents.
A car with worn bushings becomes difficult to drive on uneven surfaces, with excessive vibrations transmitted to the steering wheel. This not only makes driving uncomfortable and tiring but also poses safety risks.
Replacing control arm bushings is not costly. A quality silentblock from a reputable brand typically costs a few dozen pounds. Including the mechanic’s labour, the total cost for one axle is about £50–£100. Considering the potential dangers of worn bushings and the fact that new ones usually last 5–10 years, it’s worth addressing the issue promptly.
FAQ Section
What happens if a control arm bushing fails?
A heavily worn control arm bushing poses significant safety risks. Drivers may notice increased jolting and instability, even on minor road imperfections. Worn bushings lead to delayed steering responses, which can result in accidents. Prolonged use of a car with faulty bushings can also accelerate tyre wear.
How much does it cost to replace a control arm bushing?
Replacing a control arm bushing is an affordable service. The cost of a single bushing ranges from £5 to £10 for budget options, with premium brands costing slightly more. Mechanic fees for the replacement typically range between £50 and £100, making the total cost manageable for most budgets.
What is a silentblock?
A silentblock, also known as a metal-rubber bushing, is a flexible connector used in the suspension system. It consists of an inner and outer sleeve, with synthetic rubber as the flexible element. Its primary function is to dampen vibrations during driving. Silentblocks wear out over time and should be replaced periodically to maintain optimal performance.